Products: DEIF TAS-321 DG
DEIF TAS-321 DG
A Simplified Solution For Genset Builders.
Powerful, fast and compact, the TAS units in DEIF’s transducer range measure sinusoidal alternating voltage and/or current signal and provide output signal as direct current or voltage signal proportional to measurements for PLCs, PCs, microprocessor control, indicators, alarm units etc.
TAS transducers are micro-controller-based with one analogue output for measurement of voltage, current, frequency and phase angle on an AC network. Because these transducers have no mechanical parts like potentiometers, the calibration stability is excellent.
TAS transducers can be delivered pre-configured to set measuring values and ranges or un-configured for customer configuration using DEIF’s free PC tool.
Product Overview
Refer to the table below
Key Features
-
Mode for operation:
Measurement
-
Calculation
-
-
Applications:
Grid Support
-
Automatic Mains Failure (AMF)
-
-
Inputs:
3 Analogue R/I/V
-
39 Digital inputs
-
-
Outputs:
2 digital
-
29 Relay
-
-
Communication:
Modbus TCP/IP
-
RS-485
Key Features Continued.........
-
Monitoring:
1-ph/3-ph voltage
-
Frequency
-
Current 3ph
-
p/F for generator and mains
-
-
Functionality:
Multi-Master System
-
Plant Control (Up to 992 DG)
-
-
Measurements:
Engine oil pressure
-
Engine temperature
-
Fuel level and ECU Values
-
-
Programming:
From Display
-
With Utility Software (USW3)
-
M-Logic
-
-
Remote Monitoring
Variants Range
Overview
TAS-321 DG
-
TAS-321DG bi-dir. Current
-
TAS-321DG Power 1W2
-
TAS-321DG Power 1VAr2
Experience DEIF
Experience ultimate control. iE250
Start with the customer – find out what they want and give it to them.
Designed with you in mind
Support - Sales and After Market
Spare Parts & Technical Support
Please click on the link below for spare parts service and maintenance